Otomatic prima2/25/2023 The PRIMA-1 is modular and can be operated as a stand-alone unit or in a fully-integrated series with other ViMEG Single-Station, Monoblock, Triblock, and Quadriblock machines. The descending cork / cap track contains a photocell sensor to ensure the presence of a cork / cap in the feed channel. The on-board variable frequency digital control allows you to adjust the speed of both the conveyor and corking piston / capper head, as well as switch between automatic and manual capping on the fly. The revolving in-feed starwheel secures the base of the bottle at the point of capping, while individual microsensors ensure that the bottle opening is correctly aligned for precise application of the cork or cap. The self-contained unit is complete with its own conveyer belt for loading and unloading bottles, hopper with loading arm for the caps and corks, single corking or capping head (screw cap heads are produced based on specs of intended caps), motor, and on-board control unit for operating the machine and adjusting the production speed. The Centauro Draco can be considered to be a further development of the Otomatic, as the Draco utilises the same weapon mounted in a lighter turret on a wheeled chassis, along with a more compact radar system.The PRIMA-1 Single-Station Capper by ViMEG is a fully automatic capping machine that can be configured to apply Corks, Screw Caps, or Crown Caps to bottles of various shape or size. Despite these changes, the AMRAD failed to sell. In order to lower the weight of the system, the turret's armor was reduced and the radars were removed and replaced with an optical-only aiming system cued by a remote radar. OTO-Melara attempted to revive the concept with the AMRAD ("Artillery Multi-Role Area Defense"), which had a much lighter mounting, and which was intended for use on a variety of wheeled vehicles. No orders were received from foreign customers either, despite the 76 mm gun being already well known and widespread in many navies around the world. A popular but very time-consuming solution it takes around 12 hours is to oxidize soot residues and loosen hardened ash with a thermal regenerator. OTOMATIC therefore had no orders by the Italian army, as both SIDAM and Skyguard Aspide were already in order with very high costs, coupled with the Stinger missiles, the upgraded HAWK and the coming MEADS missiles. This was also not adopted, as it was too limited for a 1990s anti-aircraft self-propelled gun. The PRIMA is an ideal automatic continuous tempering machine for Artisan chocolatiers, bakeries and laboratories working with smaller production levels. The need for 60-80 OTOMATIC never materialised, and the Italian army was even evaluating using a L70 Bofors with a Leopard 1 as a stopgap measure. Weight: 90Kg (200 lbs.) Average Power Consumption: Kw 1.3. The Italian army needed another turret used with a Leopard 1 chassis (the turret was to be adaptable into many 40 ton vehicles, like the Leopard or the OF-40), but the amalgamation never happened, as the SIDAM 25 quad 25 mm gun was already in production and, despite being inferior and not all-weather, almost 300 SIDAMs were bought. Still, it is much cheaper to fire a proximity-fused high-caliber shell versus a cheap ISR UAV or single use UAV, compared to launching an anti air missile. The Otomatic was never put into production because the already widespread presence of anti-aircraft missiles reduced the need for a long-range AA gun on the modern battlefield. The barrel was strengthened in order to hold greater pressures, so it can fire not only HE, but also APFSDS ammunition. The gun could also be useful against lighter armored vehicles or older generation tanks. OTO Melara offered it as a long-range SPAAG that could outperform systems like the Gepard and similar versions with the British Marksman turret that mounted much smaller, but rapid-fire, 35 mm guns. The whole turret was built of steel (roughly with the same thickness of the one used in early Leopard 1s) and weighed 15 tonnes. It also included an optical fire-control system with periscopes for search and aiming, with a laser range-finder. The design combined the chassis of an OF-40, with a new turret mounting the Otobreda 76 mm gun along with associated search and targeting radars and their fire control systems: an S search radar SMA VPS-A05, with around 15 km range against aircraft and 8 km against helicopters in hovering and a fire control unit SMA VPG-A06 (Ka band). Designed and built by OTO Melara, it was armed with a single 76 mm naval gun. The OTO Main Anti-aircraft Tank for Intercept and Combat (shortened as Otomatic, a play on Automatic and OTO) was an Italian self-propelled anti-aircraft gun (SPAAG) prototype.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |